Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With lid. External dimensions 142 x 142 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With lid. External dimensions 142 x 142 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With lid. External dimensions 142 x 142 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With lid. External dimensions 142 x 142 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With lid. External dimensions 142 x 142 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With lid. External dimensions 142 x 142 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With lid. External dimensions 142 x 280 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With extended lid. External dimensions 76 x 76 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With extended lid. External dimensions 76 x 76 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With extended lid. External dimensions 76 x 76 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With extended lid. External dimensions 76 x 76 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With extended lid. External dimensions 76 x 76 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With extended lid. External dimensions 76 x 76 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
starting at € 0.00 on request plus 19% VAT. plus shipping
This product is available in various options. Please click Buy now... and select your option.
Standard box design made of water-repellent fiberboard suitable for ultra-low temperatures. Quality >special< with additional plastic water-proof coating. With extended lid. External dimensions 76 x 76 mm. Height = inner height.
Other heights can be produced on request. Grid divider can be ordered separately or can be supplied fitted.
Obi Slide Box 25 / 25 dividers, Height 35 mm fix. With index card and numbering in lower section. For slides 76x26 mm. Polysterene. External dimensions (WxDxH): 96x122x35 mm
Obi Slide Box 50 / 50 dividers, Height 35 mm fix. With index card and numbering in lower section. For slides 76x26 mm. Polysterene. External dimensions (WxDxH): 100x230x35 mm
Obi Slide Box 100 / 2x50 dividers, Height 35 mm fix. With index card and numbering in lower section. For slides 76x26 mm. Polysterene. External dimensions (WxDxH): 185x230x35 mm
Thorbi® Kryo Box 100 / 10x10 dividers, Height 52 mm fix. 100 places for 10x10 Kryo vials 1.0/2.0 ml with female thread. Transparent lid with numeric ID code (1-100). External dimensions (WxDxH): 133x133x52 mm
Thorbi® Kryo Box 81H / 9x9 dividers, Height 95 mm fix. 81 places for 9x9 Kryo vials 3.0 up to 5.0 ml. Transparent lid with numeric ID code (1-81). External dimensions (WxDxH): 133x133x95 mm
VICTOR Box 59 / 5x10 dividers for 50 Kryo vials up to 12,0 mm diameter. With three-point hinges and clasp for secure lid closure. With alphanumeric ID code on the bottom, PP. External dimensions (WxDxH) = 141x85x59 mm
VICTOR Box 57 / 10x10 dividers for 100 Kryo vials up to 12,5 mm diameter. With three-point hinges and clasp for secure lid closure. With alphanumeric ID code on the bottom, PP. External dimensions (WxDxH) = 141x151x57 mm
Thorbi insulated container. Suitable for ice, dry ice and liquid nitrogen. One-piece foamed PVC, thick-walled with very good insulating properties. Unbreakable during normal use. Chemically resistant to acids, alkalis, salts, alcohol, acetone, etc. Temperature-resistant from –196°C to +93°C.
Thorbi insulated container. Suitable for ice, dry ice and liquid nitrogen. One-piece foamed PVC, thick-walled with very good insulating properties. Unbreakable during normal use. Chemically resistant to acids, alkalis, salts, alcohol, acetone, etc. Temperature-resistant from –196°C to +93°C.
Thorbi insulated container. Suitable for ice, dry ice and liquid nitrogen. One-piece foamed PVC, thick-walled with very good insulating properties. Unbreakable during normal use. Chemically resistant to acids, alkalis, salts, alcohol, acetone, etc. Temperature-resistant from –196°C to +93°C.
Thorbi insulated container. Suitable for ice, dry ice and liquid nitrogen. One-piece foamed PVC, thick-walled with very good insulating properties. Unbreakable during normal use. Chemically resistant to acids, alkalis, salts, alcohol, acetone, etc. Temperature-resistant from –196°C to +93°C.
Thorbi insulated container. Suitable for ice, dry ice and liquid nitrogen. One-piece foamed PVC, thick-walled with very good insulating properties. Unbreakable during normal use. Chemically resistant to acids, alkalis, salts, alcohol, acetone, etc. Temperature-resistant from –196°C to +93°C.
Cryo Freezer for up to 18 cryo-tubes from 1.0 to 2.0 ml. Lid and tube holders made of HDPE with foam liner. Enables critical, repeatable cooling rate of approx. 1°C/minute for successful cryo-preservation and optimum cell yield.Easy to use with 100% isopropanol and a freezing device. No direct contact between the tubes and the alcohol. Instructions for use printed on device. Stackable.
Gamma sterilized, in resealable bags. RNase-/DNase-/DNA- and pyrogen free, not cytotoxic, cadmium free. USP Class VI, SAL 10-6. Made of PP. Autoclavable. Colour-coded due to cap inserts (optional). Temperature-resistant from -196 °C up to +121 °C. For storage in the vapor phase of liquid nitrogen. Graduated, with writing area. Fast tightening and unscrewing. Star-base foot, free-standing. Single-handed operation with Kryo vials well workstation rack possible.
Gamma sterilized, in resealable bags. RNase-/DNase-/DNA- and pyrogen free, not cytotoxic, cadmium free. USP Class VI, SAL 10-6. Made of PP. Autoclavable. Colour-coded due to cap inserts (optional). Temperature-resistant from -196 °C up to +121 °C. For storage in the vapor phase of liquid nitrogen. Graduated, with writing area. Fast tightening and unscrewing. Star-base foot, free-standing. Single-handed operation with Kryo vials well workstation rack possible.
Suitable for all Thorbi® Kryo vials. The coloured cap inserts (PP) make it easier to find and retrieve samples. 6 different colours available. Can be easily pressed into the top of the cap. Very easy to change. Suitable for writing on. In resealable bags.
Non-slip Kryo tube rack with locking system for the star-base foot
prevents the tubes from rotating when tightening and unscrewing the
caps. Single-handed operation to make work fast and comfortable.
For 5 x 10 Kryo vials (1.2 ml, 2.0 ml and 5.0 ml). Alphanumeric coding.
Made of Polycarbonate (PC). Temperature-resistant from -196 °C
up to +121 °C. Autoclavable.
Straight-side wide-mouth Jars for specimen storage. Large wide-necked opening for easy filling. Made of transparent polycarbonate with white or blue PP closure. Window-clear. High impact resistance. Non-toxic. Stackable. Popular screw-top jar also for freezing down to –90°C. Fully unscrew the lid prior to autoclaving.
Blood bag and plasma storage racks made of tough 3-mm acrylic glass, transparent. Handles at the two ends. With 2 movable partitions in the standard unit. Labelling tabs and cards optional. Card size WxH = 25x50 mm. Modified designs possible.
Isotherm Mini Cooler -20°C for 12 tubes from 0.5 ml to 2.0 ml. With alphanumeric ID code on the lid and the lower section. Temperature-conditioning of reagents (enzymes, DNA, RNA, cell suspensions, etc.) on the laboratory bench. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
Isotherm Mini Cooler -20°C for 20 tubes from 0.5 ml to 2.0 ml. With alphanumeric ID code on the lid and the lower section. Temperature-conditioning of reagents (enzymes, DNA, RNA, cell suspensions, etc.) on the laboratory bench. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
Isotherm Mini Cooler -20°C for 32 tubes from 0.5 ml to 2.0 ml, lid with gel. With alphanumeric ID code on the lid and the lower section. Temperature-conditioning of reagents (enzymes, DNA, RNA, cell suspensions, etc.) on the laboratory bench. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
Isotherm Mini Cooler -20°C for 32 tubes from 0.5 ml to 2.0 ml, lid without gel. With alphanumeric ID code on the lid and the lower section. Temperature-conditioning of reagents (enzymes, DNA, RNA, cell suspensions, etc.) on the laboratory bench. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
Isotherm Mini Cooler 0°C for 12 tubes from 0.5 ml to 2.0 ml. With alphanumeric ID code on the lid and the lower section. Temperature-conditioning of reagents (enzymes, DNA, RNA, cell suspensions, etc.) on the laboratory bench. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
Isotherm Mini Cooler -20°C for 12 tubes from 0.5 ml to 2.0 ml. With alphanumeric ID code on the lid and the lower section. Temperature-conditioning of reagents (enzymes, DNA, RNA, cell suspensions, etc.) on the laboratory bench. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
Isotherm Mini Cooler 0°C for 32 tubes from 0.5 ml to 2.0 ml, lid without gel. With alphanumeric ID code on the lid and the lower section. Temperature-conditioning of reagents (enzymes, DNA, RNA, cell suspensions, etc.) on the laboratory bench. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
Isotherm Mini Cooler 0°C for tubes ø 12-17 mm, e.g. 15 ml centrifuge tubes or vacutainer1). With alphanumeric ID code on the transparent lid and the lower section. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
Isotherm Mini Cooler 0°C for tubes ø 12-17 mm, e.g. 15 ml centrifuge tubes or vacutainer1). With alphanumeric ID code on the transparent lid and the lower section. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
Isotherm Mini Cooler -20°C for 96 PCR tubes 0.2 ml. Specially developed to protect enzymes and other biological specimens while working at the laboratory bench. Aluminium block with 96 holes in universal 96-well standard format integrated in Mini Cooler made of resistant polycarbonate filled with non-toxic insulating fluid. With non-slip feet. With alphanumeric ID code on the aluminium block. 0.2-ml PCR containers individually or in strips as well as 96-well plates are maintained at between –15°C and –20°C for up to 2 hours.
Isotherm Quick Freeze -70°C for 12 tubes from 0.5 to 2.0 ml. With alphanumeric ID code on the transparent lid and the lower section. For rapid and repeated refrigeration in the molecular biology laboratory. Can be used repeatedly for up to 45 minutes. Made of resistant polycarbonate filled with non-toxic insulating fluid. No direct contact between the tube and the insulating fluid. With non-slip feet.
![[Homepage]](b/t1.gif){kind=small}
Twitter
Facebook
Google+
